KCMA Statement on PCB Cabinet Study

Emissions of Tetrachlorobiphenyls (PCBs 47, 51, and 68) from Polymer Resin on Kitchen Cabinets as a Non-Aroclor Source to Residential Air - Nicholas J. Herkert, Jacob C. Jahnke, and Keri C. Hornbuckle
Emissions of Tetrachlorobiphenyls (PCBs 47, 51, and 68) from Polymer Resin on Kitchen Cabinets as a Non-Aroclor Source to Residential Air - Nicholas J. Herkert, Jacob C. Jahnke, and Keri C. Hornbuckle<br /> Monday, April 23 -- KCMA Statement on PCB Cabinet Study Emissions of Tetrachlorobiphenyls (PCBs 47, 51, and 68) from Polymer Resin on Kitchen...

Monday, April 23 -- KCMA Statement on PCB Cabinet Study

Emissions of Tetrachlorobiphenyls (PCBs 47, 51, and 68) from Polymer Resin on Kitchen Cabinets as a Non-Aroclor Source to Residential Air - Nicholas J. Herkert, Jacob C. Jahnke, and Keri C. Hornbuckle

Both Aroclor and non-Aroclor sources of airborne polychlorinated biphenyls (PCBs) were found in residential homes. We deployed passive air samplers at 16 residences and found PCB-47, PCB-51, and PCB-68 to account for up to 50% of measured indoor ΣPCBs (2700 pg m–3). Although PCB-47 and PCB-51 are neurotoxins present in Aroclor mixtures (<2.5 and <0.3 wt %, respectively), we found them at much higher levels than expected for any Aroclor source. PCB-68 is not present in Aroclor mixtures. Another non-Aroclor congener, PCB-11, a byproduct of pigment manufacturing, was found inside and outside of every household and was frequently the predominate congener. We conducted direct measurements of surface emissions and identified finished cabinetry to be a major source of PCB-47, PCB-51, and PCB-68. We hypothesize that these congeners are inadvertent byproducts of polymer sealant manufacturing and produced from the decomposition of 2,4-dichlorobenzoyl peroxide used as an initiator in free-radical polymerization of polyester resins. The presence of these three compounds in polymer products, such as silicone, has been widely noted, but to our knowledge they have never been shown to be a significant environmental source of PCBs.


“This study is news to us and quite unexpected and surprising. We have never heard of these allegations before nor of the possible sources associated with cabinetry. We have not reviewed this particular study at this time. We will work with all parties involved to objectively investigate and assess the situation. KCMA member products do not intentionally add or emit PCBs to the environment." - Betsy Natz, CEO, KCMA

Source: www.kcma.org